We are engaged in manufacturing and supplying a wide range of premium quality Packaged Drinking Water (Bottling Water) & Mineral Water Plant. These are ideal for solving drinking water problem and to meet various industrial requirements. Manufactured using high quality raw material, these are easy to install and highly efficient. They are offered at affordable prices.

1. Economic

2. Features:

  •  High efficiency
  • Resistant to various bad weather conditions
  • Easy to install
6000 LPH Plant

6000 LPH Plant

Mineral Water / Packaged Drinking Water Project consists of the following:

Water Source:

Water should be collected from the source which should be well protected, available easily, un-contaminated. Sources can be anything viz. Borewell water Line, Closed Ring Well, Municipal Supply Line, or another source where treatment is possible.

Water Transfer:

Water is transferred to Raw Water Storage Tanks using a proper pumping system and un-contaminating piping work. Either Submersible Pump or surface mounted Centrifugal pump can be used with good quality UPVC or CPVC or SS piping can be used for this application.

Water Treatment System:

Complete Purification system comprising of :

1. Raw Water feed Pump

2. Chlorine Dosing system

3. Multi Sand Media Filtration for Coarse filtration

4. Activated Carbon Filtration

5. Water Softening / Anti Scalent Treatment Process

6. Micron Cartridge Filtration (5 Micron)

7. Reverse Osmosis Filtration

8. Purified Water Storage in Stainless Steel tank

9. Transfer Pump in stainless steel Pump

10.Micron Cartridge Filtration (1 Micron)

11.Micron Cartridge Filtration (0.2 Micron)

12.Final Purified water Storage in SS tank

13.UV Sterilization

14.Ozone Disinfection

Water Process Description:

Pre Treatment :

Raw water is chlorinated to oxidize the organic impurities (kill bacteria and virus). This water is passed through Multi Media Sand Filter with the help of Feed pump of suitable capacity to remove suspended impurities followed by Activated Carbon Filter to remove excess chlorine (de-chlorination), odour, colour and turbidity due to colloidal suspended impurities and organic impurities.


RO System :

De chlorinated water is then dosed with Anti Scalent Solution to avoid scale formation on the membrane or passed through Softener to remove hardness. Softened water is further passed through 5-micron cartridge filter to remove micron particles to avoid clogging of the RO membrane and to improve the silt density index. Water further passed though RO Unit which is complete with High Pressure Pump, Membranes with Pressure tubes, Electrical control panel and wet panel, piping with valves and all the required accessories viz., pressure switch, solenoid valve etc. Reverse Osmosis unit will reduce the dissolved Salts up to 95% of the in feed TDS. Treated water from RO unit will be stored into SS tank.

Post Treatment :

This treated water is then passed through 0.2 micron cartridge filter before it is taken for the filling. Ozonator unit producing ozone gas is installed in series at the outlet of UV System to provide the residual effect of ozone to the water.

Water Testing Facility :

Purified Water is tested using IN HOUSE Water Testing laboratory Where Chemical and Micro Biologically Water is tested for Chemical and Micro Biological parameters. For this, a complete full fledge Water Testing CHEMICAL and MICRO BIOLOGICAL Lab is required. However, water is also tested for Toxic Substances, Pesticide and Radio-nuclear parameters in outside Bureau of Indian standards approved laboratory. (Also, see Laboratory Service…)

Laboratory Requirements :

Chemical Lab:

  • Min 150 sq. ft Room / Shelves, Cup-boards (Your Scope)
  • All Required Chemicals and Reagents
  • Glassware / PP Ware
  • Instruments as per BIS

Micro-Biology Lab:

  • Min 150 sq. ft Room / Shelves, Cup-boards (Your Scope)
  • All Required Chemicals,Media and Reagents
  • Instruments as per BIS
3000 LPH Plant

3000 LPH Plant

4000LPH RO

4000 LPH RO

5000 LPH Plant

5000 LPH Plant

10000 LPH Plant

10000 LPH Plant